Domestic small and medium-sized power plant big boiler industry specifications generally adopts the medium pressure -3.82 MPa, 450 ° C or sub-high pressure 5.29 MPa-485 ° C, there is also low pressure parameters such as 2.5 MPa -400 ° C . If it is a condensate turbine for pure power generation, the higher the boiler parameters are, the smaller the boiler tonnage required for generating unit (1MW) electricity will be. If the lower the boiler parameters, the larger the tonnage of the boiler needed for generating unit (1MW) electricity. Medium pressure boiler can match 5 t/H for each MW for user reference, namely 5 mw pure power will need 25 t/H steam, say the pressure is 3.82 MPa and the temperature is 450 ° C.

Hot water big boiler industry specifications is one of the important equipment for the district to provide our real estate company, and two gas hot water provide the fast boiler boiler flotilla of environmental performance, in full compliance with state regulations after smoke was detected in the rear of the boiler. And boiler operation is safe, stable, we use the very at ease. --customer feedback

Product: 15 ton wns series gas fired steam big boiler industry specifications

Application field: tannery factory

Ordinary big boiler industry specifications exhaust gas temperature of about 220 deg.] C, the water vapor generated during fuel combustion are discharged with the flue gas from the smoke tube, which can lose a lot of heat. These condensing boilers is recycled part of the heat, heating return water heating system, to improve the thermal efficiency of the boiler by reducing the exhaust gas temperature (below 90 ℃). In the same amount of gas consumption, the lower the boiler return, the more heat is recovered, the higher the thermal efficiency of the boiler.